Lessons Learned About Homes

Tips on How to Do Deck Staining Your deck if not cleaned and stained will not be able to serve you for an extended period. You will notice that if water whether from rain or just several drops will destroy it and make it very weak. Moist conditions will at no time be able to destroy a stained deck. If it is not able to repel the moist conditions, it is advisable that you think of applying stain. You will be able to find solid, semi transparent and the bright stains on the market today. For an old deck, when you apply stains on it will be able to serve you for a longer period and also make it look beautiful. The stain also acts as a filler to those decks which have cracks. The tips below will guide you when you want to apply stain on your deck. the weather is a major factor to consider when you want to apply stains. Choose the season when it is not very hot or freezing. The hot season enables the stain to dry quickly, but it will not be able to be absorbed well in the woods. If it is also wet, the stain will take long before it dries up. This will affect your working negatively. The perfect conditions are when the temperatures are 50F to 90F. Make sure that thorough preparation on the deck is carried out before staining. You should ensure that the surface where you are going to apply the stain is well clean and free form dirt. Ensure that you have applied sand in those shattered places. A knife should be used to remove dust particles left between the boards. Use a deck cleaner instead of the pressure cleaner because the pressure cleaner will make you wait more time for the deck to get dry.
Getting Creative With Resources Advice
The stain type that you use should match the woods. The various types of stain have different advantages when applied. The choice of stain you decide to should be in line with the previous one used if it is an older deck. You will not be able to use the clear and the semi transparent stain if you had earlier used a solid one. When you use the clear or the semitransparent type, later you can use the solid.
Why not learn more about Stains?
The coating of the stain should also be thin. If the gallons that you want to use are many, you should first mix them well until you get a consistent color. You should then apply thin coating of the stain to prevent puddles which don’t soak in the woods. When applying the semi transparent or the clear stain, make it thinner.

Leave a Reply

Your email address will not be published. Required fields are marked *